Multi Parameter Water Quality Analyzer

Multi parameter water quality analyzer adopts Photoelectric detection than color principle to replace traditional optical colorimetric; to eliminate personal error.
So testing resolution is high. When testing, put special testing liquid into the water sample, water will change color. Then put the sample water on the photo electricity comparator block, the analyzer will determine iron density according to water color.
It is widely used in large, middle and small size water plant and industry or domestic water, to test iron density, in order to control water quality to meet standard requirement.

Category:

Description

Characters:
1. Micro computer control, key touch board. LCD digital display back light. Use latest micro process technology and high stable integrated circuit.
2. Data linear processor and data smoothing function. Quickly auto points correction.
3. Curve calibration function. Directly read accurate testing figure.
4. Long lifetime for light source. Free maintenance. Guarantee could work for long time.
5. Patent right protection. Advanced technology. Could meet GB/T5750-2006 life drink water healthy standard.

Specifications Multi Parameter Water Quality Analyzer

1. test water quality for kinds of irons.
2. 0.001 resolution
3. LCD display result

Model TL9022:

  • Measuring Range (mg/L):
    – Residual Cl: 0~2.5
    – ClO2: 0~2.0
  • Minimum Readout: 0.001mg/L
  • Basic Error (F.S): ±5% FS+1 bit
  • Repeatability: 2%
  • Power Supply: AC 220V/ 50Hz/15W
  • Characters: Table type, micro key touch board; LCD display; several points curve calibration.

Model TL9025:

  • Measuring Range (mg/L):
    – Residual Cl: 0~2.5
    – Total Cl: 0~5.0
    – Combined residual: 0~2.5
    – ClO2: 0~2.0
    – NaNO2: 0~0.3
  • Minimum Readout: 0.001mg/L
  • Basic Error (F.S): ±5% FS+1 bit
  • Repeatability: 2%
  • Power Supply: AC 220V/ 50Hz/15W
  • Characters: Table type, micro key touch board; LCD display; several points curve calibration.

Model TL9029:

  • Measuring Range (mg/L):
    – Residual Cl: 0~2.5
    – Total Cl: 0~5.0
    – Combined residual: 0~2.5
    – ClO2: 0~2.0
    – NaNO2: 0~0.3
    – Dissolved O2: 0~12;
    – Ammonia : 0~10
    – Fe: 0~0.8
    – Cu: 0~2.0
  • Minimum Readout: 0.001mg/L
  • Basic Error (F.S): ±5% FS+1 bit
  • Repeatability: 2%
  • Power Supply: AC 220V/ 50Hz/15W
  • Characters: Table type, micro key touch board; LCD display; several points curve calibration.

Reviews

There are no reviews yet.

Be the first to review “Multi Parameter Water Quality Analyzer”

Alamat email Anda tidak akan dipublikasikan. Ruas yang wajib ditandai *